Abstract: A non-thermal atmospheric pressure argon plasma jet for medical applications has been generated using a high-voltage pulse generator and a homemade dielectric barrier discharge (DBD) reactor with a cylindrical configuration. A plasma jet of about 6 cm of length has been created in argon gas at atmospheric pressure with an applied peak to peak voltage and a frequency of 10 kV and 50 kHz, respectively. The length and the shape of the created plasma jet were found to be strongly dependent on the electrode setup and the applied voltage and the signal frequency values. The length of the plasma jet increases when the applied voltage and/or its frequency increase, while the diameter at its end is significantly reduced when the applied signal frequency increases. For an applied voltage of 10 kV, the plasma jet diameter decreases from near 5 mm for a frequency of 10 kHz to less than 1 mm at a frequency of 50 kHz. This obtained size of the plasma jet diameter is very useful when the medical treatment must be processed in a reduced space.
N° Revue: Nanoscale Research Letters 9 (1) (2014) - Pagination: 697 - Date: 2014
URL: https://nanoscalereslett.springeropen.com/articles/10.1186/1556-276X-9-697
Mots cles: Atmospheric pressure plasma jet – Electrical discharge parameters – Plasma jet geometry – Applied voltage – Signal frequency
co_auteurs: M.T. Benabbas, S. Sahli , A. Benhamouda , S. Rebiai